
Solar Ground Mount
CM401 Single pile with cement injection
Fixed-tilt ground structures on PHC piles, ramming piles, concrete and ground screws.
CM401
Single Pile with Cement Injection
CM401 Single pile with cement injection
- KEY BENEFITS AND FEATURES
- Easy to InstallThe simple structure and some pre-assembly (such as the pre-assembly between vertical shaft and vertical support the pre-assembly about end clamp and middle clamp on the rail etc) greatly reduces the installation time and cost.
- Low Raw Material CostSince this system has one shaft it uses less raw material than the traditional double-shaft system.
- Adaptable to Various Types of ModulesThe height of the clamp and the length of the rail can be adjusted to match customer’s modules.
- Proven ReliabilityThe system is designed to stand up to the extreme weather and other international structure load standard by the skilled engineer. The main support components also have been test to guaranty its structure and load-carrying capacity. Its service life can reach 25 years.
Data
Technical data
| Installation site | open area, lake,mountain and wetland |
|---|---|
| Installation angle | from 5°to 40°, according to customer’s feasibility study |
| Module | poly/mono/thin film |
| Material | HDG Steel/POSMAC Q235B&AL6063-T5 |
| Surface Treatment | Hot-dip galvanizing |
| Wind load | up to 57m/s |
| Snow load | 0.5KN/M² |
| Foundation | Ramming pile |
| Anti-corrosive | HDG/VCI/SEBF |
Components
What is in the kit









Installation notes
How it goes together




Solar Ground Mount





WeChat +86 159 0616 4059